CO-2 TANK – Check to see if you’re out of CO-2. The gauge on the tank should be in the green, if not you are out of CO-2.
CO-2 TANK REFILL – Check to see if there is a washer between the regulator and the CO-2 tank, when changing out an empty tank.
BIB PRODUCT – Check your BIB products and make sure they’re not empty and or connected improperly.
CARBONATOR – (Shiny Canister/Compressor.) Check to see if it’s plugged into the wall outlet. Also, check the outlet to make sure the power is on.
COLD PLATE – Make sure the cold plate is iced down. The soda will not taste right if the product is warm.
H-2O – If there is ongoing construction in or around your facility, the water may be turned off. If this is the case, unplug the carbonator from the outlet to keep it from burning up the motor. “Thus saving you the cost of a replacement.”
Note: Recently we have been receiving a heavy amount of unnecessary service calls resulting from the above conditions. Due to the fact that these are not service call conditions, there will be a $55.00 service charge, should we be called to service the soda system for any of the above reasons. Be sure to check these, before calling for service.